This beast of a machine from Chase Bliss meets and exceeds the requirements for appearing on our list, featuring the requisite boost and overdrive, but also a fuzz circuit. Each of these are assignable to either of the two channels in the pedal, and there are 33 routing combinations thereof, making it extremely flexible.
Controls on this unit include a Master volume and a Mix knob, as well as a Gain and Tone for each channel. A switch below the knobs lets you easily select between the boost, drive, or fuzz circuit. The Stack switch allows you to change the routing, with options for Parallel, A into B, and B into A, tunable with the Mix knob. This would be eminently usable if that were all, but since it’s Chase Bliss, there’s more going on here.
The toggle between the footswitches recalls two presets. Preset #1 is to the right, which you can assign by holding down the right footswitch for three seconds, then holding down both footswitches for an additional three seconds until the LED blinks confirming a save. Preset #2 is to the left and assignable by the same process, except starting with the left footswitch. You can use MIDI to recall your presets, or use the company’s own Faves pedal to do that job. Every setting on the pedal can be saved this way, including the position of the dip switches.
According to the user manual, the dip switches work with your expression of choice in the following manner: “The Master, M/S, Gain A, Tone A, Gain B, and Tone B dip switches on the left side simply turn that parameter on or off expression / CV capability. Master, M/S, Gain A, Tone A, Gain B, and Tone B dip switches on the right side control whether or not the parameters will rise (go clockwise with expression) or fall (go counterclockwise with expression).”
All of this is digitally controlled, but each of the circuits are totally analog; this isn’t a DSP situation. Incredibly modern, incredibly flexible pedal that could just be your be-all, end-all.
The Pete Thorn walkthrough should provide all the tones and intro you need.
It’s possible to save as much as $100 when shopping for this pedal used on Reverb.
Specs:
- Clipping circuitry: JFET, IC
- Voicing: Custom
- True bypass?: Yes
- Switchable order?: Yes
- Power: 60 mA at 9V DC
- Other features: Expression pedal input with dip switches to customize, preset save, MIDI input for recalling presets, optional buffer